Cold Rolled 2b Ba Mirror Surface 0.3mm Thick Mild Steel Sheet Ss 201 Cr Stainless Steel Plate and Sheet
- Information
- Product Description
0.3mm stainless steel sheet
| Product Name | 201 0.3mm stainless steel sheet |
| Thickness | Cold-rolled stainless steel: 0.2-2mm |
| Width | 60mm-1500mm |
| Length | as requirement |
| Surface | BA/2B/NO.4/8K/HL WITH OR WITHOUT pvd COLOUR |
| Payment terms | L/C T/T (30%DEPOSIT) |
| Stock or not | enough stock |
| Sample | Provided Freely |
| MTC | Mill Test Certificate is supplied with shipment, Third Part Inspection is acceptable |
| Container Size | 20ft GP: 5898mm(Length)x2352mm(Width)x2393mm(High) 40ft GP: 12032mm(Length)x2352mm(Width)x2393mm(High) 40ft HC: 12032mm(Lengh)x2352mm(Width)x2698mm(High) |
| Delivery time | Within 7-10 Working Days |
0.3mm stainless steel sheet Surface
| Finish | Thickness | Characteristics | Applications |
| 2B | 0.3mm~2.0mm | Finished by heat treatment, pickling after cold rolling, followed by skin pass line to be more brighter and smooth surface | General Application Medical Instruments,Tableware |
| BA (Bright Annealed) | 0.2mm~2.0mm | Bright heat treatment after cold rolling | Kitchen utensil, kitchen ware,architectural purpose |
| No. 4 | 0.4mm~3.0mm | Polishing with No. 150 to No.180 mesh abrasivesThe most popular finishes | Milk & Food processing acilities, Hospital Equipment, Bath-tub |
| 8K | 0.5mm~2.0mm | A mirror-like reflective surface by polishing with finer abrasives over 800 mesh | Reflector, Mirror, Interior-Exterior decoration forbuilding |
| HL(Hair Line) | 0.4mm~2.0mm | Finished by continuous linear polishing | Architectural purposes, escalators, kitchen ware vehicles |
201 Stainless Steel SHEET
Copper content: J4>J1>J3>J2>J5.
Carbon content: J5>J2>J3>J1>J4.
Hardness arrangement: J5, J2>J3>J1>J4.
The order of prices from high to low is: J4>J1>J3>J2, J5.
J1(Mid Copper): The carbon content is slightly higher than J4 and the copper content is lower than J4. Its processing performance is less thanJ4. It is suitable for ordinary shallow drawing and deep drawing products, such as decorative board, sanitary products, sink,product tube, etc.
J2, J5:Decorative tubes: Simple decorative tubes are still good, because the hardness is high (both above 96°) and the polishing is morebeautiful, but the square tube or the curved tube (90°) is prone to bursting. In terms of flat plate: due to the high hardness, the board surface is beautiful, and the surface treatment such as frosting, polishing and plating is acceptable. But the biggest problem is the bending problem, the bend is easy to break, and the groove is easy to burst. Poor extensibility.
J3(Low Copper): Suitable for decorative tubes. Simple processing can be done on the decorative panel, but it is not possible with a little difficulty. There is feedback that the shearing plate is bent, and there is an inner seam after breaking (black titanium,color plate series, sanding plate, broken, folded out with inner seam). The sink material has been tried to bend, 90 degrees, but it will not continue.
J4(High Copper): It is the higher end of the J series. It is suitable for small angle types of deep drawing products. Most of the products that require deep salt picking and salt spray test will choose it. For example, sinks, kitchen utensils, bathroom products, water bottles, vacuum flasks, door hinges, shackles, etc.
0.3mm stainless steel sheet
Suit for all kinds of transport,or as required
1) 20ft container: 26tons(Can load 5.8M Max)
3) more than 100tons:(can pack by bulk vessel)
BA / NO.4 NO.3/ hair line with PVC, BAOJIA support to use 2-3CM inner paper core, try best to make sure taht coils won't collapse.
Our Manufacturing Department:
1. Cold rolling machines, 20Hi / 18Hi roller with computer control system
2. 18 & 20 oil roller rolling machine, makes the surface more smooth & steady, 0.01mm tolerance in thickness
3. Bright anneal Oven 1050mm, two lines, 1450mm one line
4. Bright process machine, with paper interleave during processing, protect the surface
5. Strip coil cutting, slit/trim edge cutting machines
6. 2B, BA finshed surface of 410s, soft DDQ quality
Main Products: Cold rolled Stainless steel coil, Stainless steel circle, Stainless steel sheet, Stainless steel strip, Stainless steel 430, 410, 409, 201grade.
We can customize the exclusive brand with the smallest MOQ for customer.
We warmly wecome customers from all over the world. And look forward to establishing a long -trem mutual beneficial relationship for a bright future together. Guang dong baojia stainless steel will always be your reliable partner in china.
We can provide you neccessory certificates for your custom prupose.
1. Mill test certificate
2. CO/Form A/Form E/Form F
3. PSC/CIQ
Special Request of other certificate,Pllease check with us.
A: For stock products,will make shipments in 2-5 days after receiving deposit or receiving T/T;
for products need new production for common materials,usually make shipments in 7-10 days;
for products need new special and rare materials,usually need 15-20 days to make shipment.
Q2. Can you provide the samples?
A:Samples can be provided with samples' charge and courier fee by the buyer's side.
Q3. What's your payment terms?
A: Down payments 30%TT and balance 70% TT or L/C.
A: Yes. It can be customized as per the customers' request.
Q6. How to ensure the quality?
A:Mill Test Certificate is supplied with shipment.
If needed, a Third Party Inspection is acceptable or SGS.
